Hi,

You probably need DAHDI, but it seems you have the autoconfig-buttons-freepbx.sh with a typo for Zap trunks... look for the line:

asterisk -rx "zap show channels" | grep -v from-internal | grep -v pseudo | grep -v Language | awk '{print $1}' | tail -n 2 | while read LINEA

and change it to:

asterisk -rx "zap show channels" | grep -v from-internal | grep -v pseudo | grep -v Language | awk '{print $1}' | tail -n +2 | while read LINEA

(Add the plus sign before the number 2 and after "tail -n ").

Finally restart fop2:

service fop2 restart

Best regards,

If you do a "show channels" in the asterisk console when making some calls and see DAHDI/xx, then you have to use DAHDI. If you see ZAP, then change it to ZAP.

Anyways, the auto config script is creating your trunk incorrectly, as it only shows the 1st channel and the last two. If you write the config by hand it should look like:

[DADHI/1]
type=trunk
label=DADHI trunk
channel=DADHI/2
channel=DADHI/3
channel=DADHI/4
channel=DADHI/5
channel=DADHI/6
channel=DADHI/7
channel=DADHI/8
channel=DADHI/9
.. {snip } ..
channel=DADHI/30
channel=DADHI/31

Hi,

That is not correct, you have to remove the "-1" suffix from the channel name. Use only DAHDI/1, DAHDI/2, etc.

Best regards,

Digium choose that name to make our lives easier!

Zap is harder to mispell: ZAP, AZP, PAZ

But Dahdi : DADHI, DAHDI, DHADI, they all look the same!