On my toolbar I have all the buttons, but when I click on any of them with the exception of hangup, nothing happens.
The most important would be to get recording up and going, but would like to have all these features working within FOP2.

The problem may be extension to extension calls?
As of now I have it setup for testing, no SIP. I have 2 phones each given an extension and can dial out on POTS (4) lines.
I have only tried these features with extension to extension calls. Do these features apply to these kinds of calls?

I have within my FreePBX setting to always record incoming and outgoing calls.

As well as within my fop2.cfg settings for my 2 extensions:

user=6910:6910:all
user=6920:6920:all

I guess my question is do I need to do any further configurations to get these buttons to work?

Thanks in advance,

Thanks once again Nicolás.
Debug mode will help out I'm sure, or at least it helped me with getting FreePBX configured correctly.

The most probable reason is misconfiguration in your button file, or perhaps not enough permissions in manager.conf

Just one more question who do I give permissions to my users within FreePBX and FOP2 are by extension.
So do I write this as :
------------------------------------------------------------------------------------------------------------------
[6910]
secret = password
deny=0.0.0.0/0.0.0.0
permit=127.0.0.1/255.255.255.0
read = all,system,call,log,verbose,command,agent,user,originate
write = all,system,call,log,verbose,command,agent,user,originate
[6920]
secret = password
deny=0.0.0.0/0.0.0.0
permit=127.0.0.1/255.255.255.0
read = all,system,call,log,verbose,command,agent,user,originate
write = all,system,call,log,verbose,command,agent,user,originate
-----------------------------------------------------------------------------------------------------------------
or, do I write it as:

[fop2]
secret = password
deny=0.0.0.0/0.0.0.0
permit=127.0.0.1/255.255.255.0
read = all,system,call,log,verbose,command,agent,user,originate
write = all,system,call,log,verbose,command,agent,user,originate
__________________________________________________________________________________

also my fop2.cfg file is set as:

manager_user : (same name as manager.conf)
manager_secret: (same password as manager.conf)

Thanks in advance,

am trying to get this to work I got the debug mode to start once when I had the listen port to 4446... since then it states:
Flash Operator Panel 2 - No valid license found. Demo Mode

Can't listen to port 4446

Have changed to like your manual states to listen on port 5038 think that may have been the problem but same message.

Can't listen to port 5038

and when i run the test it states:
/usr/local/fop2/fop2_server --test
Flash Operator Panel 2 - No valid license found. Demo Mode
Connection to manager OK!

Nevermind it wouldn't work on that port so I tried 4446 again and that didn't work either but 4447 did... What is up with this.. why do I have to keep changing the listen to port?

loged in debug mode:

No flash clients connected

• .*.*.* <= <msg data="GENERAL|contexto|1|" />
• .*.*.* => { 'btn': '0', 'cmd': 'key', 'data': 'qgM2hm4glwCZcN5qwlav0NRqCUgfkGAE', 'slot': '' }

*.*.*.* => { 'btn': '0@GENERAL', 'cmd': 'version', 'data': '2.00', 'slot': '' }

• .*.*.* <= <msg data="1|auth|6910|19eeb1b17b15839e0550de9390a5292d" />
• .*.*.* => { 'btn': '0@GENERAL', 'cmd': 'permit', 'data': 'YWxs', 'slot': '' }

*.*.*.* => { 'btn': '16@GENERAL', 'cmd': 'zbuttons', 'data': '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', 'slot': '' }

• .*.*.* <= <msg data="1|initState||19eeb1b17b15839e0550de9390a5292d" />
• .*.*.* => { 'btn': '1@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }

*.*.*.* => { 'btn': '2@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }

*.*.*.* => { 'btn': '3@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }

*.*.*.* => { 'btn': '4@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }

*.*.*.* => { 'btn': '5@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }

*.*.*.* => { 'btn': '6@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }

*.*.*.* => { 'btn': '7@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }

*.*.*.* => { 'btn': '8@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }

*.*.*.* => { 'btn': '9@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }

*.*.*.* => { 'btn': '10@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }

*.*.*.* => { 'btn': '15@GENERAL', 'cmd': 'settext', 'data': '', 'slot': '0' }

*.*.*.* => { 'btn': '15@GENERAL', 'cmd': 'state', 'data': 'DOWN', 'slot': '0' }

____________________________________________________________________________________________________________
dial another extension gives me this:

127.0.0.1 <- Event: Newstate
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/6-1
127.0.0.1 <- State: Up
127.0.0.1 <- CallerID: <unknown>
127.0.0.1 <- CallerIDName: Free For All Incorporated
127.0.0.1 <- Uniqueid: 1260842164.38
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Link
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel1: DAHDI/6-1
127.0.0.1 <- Channel2: DAHDI/5-1
127.0.0.1 <- Uniqueid1: 1260842164.38
127.0.0.1 <- Uniqueid2: 1260842172.39
127.0.0.1 <- CallerID1:
127.0.0.1 <- CallerID2: 6910
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: ExtensionStatus
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Exten: 6010
127.0.0.1 <- Context: default
127.0.0.1 <- Status: 1
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: ExtensionStatus
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Exten: 6910
127.0.0.1 <- Context: ext-local
127.0.0.1 <- Status: 1
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: ExtensionStatus
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Exten: 6920
127.0.0.1 <- Context: ext-local
127.0.0.1 <- Status: 1
127.0.0.1 <- Server: 0

pressing record gives me this:

127.0.0.1 -> Action: Monitor
127.0.0.1 -> Channel:
127.0.0.1 -> ActionID: monitor-Monitor-
127.0.0.1 -> Mix: 1
127.0.0.1 -> File: 6910-1260842319
127.0.0.1 -> Async: True

127.0.0.1 <- Response: Error
127.0.0.1 <- ActionID: monitor-Monitor-
127.0.0.1 <- Message: No channel specified
127.0.0.1 <- Server: 0
____________________________________________________________________

I guess my question is now How do I specify a channel?

I have fixed that thanks, Please take a look above as I have edited my previous post. Thank you very much.

sorry about that (me not following directions)
for the extensions I have up here is my button.cfg:

[SIP/6910]
type=extension
extension=6910
label=POTS 1
mailbox=jmituzas@gmail.com
context=from-internal
extenvoicemail=*6910@device

[SIP/6920]
type=extension
extension=6920
label=POTS 2
mailbox=jmituzas@gmail.com
context=from-internal
extenvoicemail=*6920@device

[SIP/6930]
type=extension
extension=6930
label=POTS 3
mailbox=6930@device
context=from-internal
extenvoicemail=*6930@device

[SIP/6940]
type=extension
extension=6940
label=POTS 4
mailbox=6940@device
context=from-internal
extenvoicemail=*6940@device

[DAHDI/1]
type=trunk
label=DAHDI
channel=DAHDI/3
channel=DAHDI/4
_________________________________________________________________________________________________

ok start the fop2 in debug mode and trial to dial another extension:
/usr/local/fop2/fop2_server -X 15

10.30.20.137 => <?xml version="1.0"?>
<!DOCTYPE cross-domain-policy SYSTEM "http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd">
<cross-domain-policy>
<allow-access-from domain="*" to-ports="4444" />
</cross-domain-policy>

• * CLEAN SOCKET connection lost removing socket IO::Socket::INET=GLOB(0xec6d730)
• * CLEAN SOCKET flash client connection lost

No flash clients connected

10.30.20.137 <= <msg data="GENERAL|contexto|1|" />
10.30.20.137 => { 'btn': '0', 'cmd': 'key', 'data': 'UaOOw2cpN8ysPsC6cZn9nR7z4gL', 'slot': '' }

10.30.20.137 => { 'btn': '0@GENERAL', 'cmd': 'version', 'data': '2.00', 'slot': '' }

10.30.20.137 <= <msg data="1|auth|6910|7049c25fd66678daffafc348c3a2c654" />
10.30.20.137 => { 'btn': '0@GENERAL', 'cmd': 'permit', 'data': 'YWxs', 'slot': '' }

10.30.20.137 => { 'btn': '16@GENERAL', 'cmd': 'zbuttons', 'data': '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', 'slot': '' }

10.30.20.137 <= <msg data="1|initState||7049c25fd66678daffafc348c3a2c654" />
10.30.20.137 => { 'btn': '1@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }

10.30.20.137 => { 'btn': '2@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }

10.30.20.137 => { 'btn': '3@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }

10.30.20.137 => { 'btn': '4@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }

10.30.20.137 => { 'btn': '5@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }

10.30.20.137 => { 'btn': '6@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }

10.30.20.137 => { 'btn': '7@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }

10.30.20.137 => { 'btn': '8@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }

10.30.20.137 => { 'btn': '9@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }

10.30.20.137 => { 'btn': '10@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }

10.30.20.137 => { 'btn': '15@GENERAL', 'cmd': 'settext', 'data': '', 'slot': '0' }

10.30.20.137 => { 'btn': '15@GENERAL', 'cmd': 'state', 'data': 'DOWN', 'slot': '0' }

10.30.20.137 <= <msg data="11|originate|12|7049c25fd66678daffafc348c3a2c654" />

127.0.0.1 -> Action: Originate
127.0.0.1 -> Channel: SIP/6910
127.0.0.1 -> Exten: 6920
127.0.0.1 -> Context: from-internal
127.0.0.1 -> Priority: 1
127.0.0.1 -> CallerID: <6910>
127.0.0.1 -> Async: True

127.0.0.1 <- Response: Success
127.0.0.1 <- Message: Originate successfully queued
127.0.0.1 <- Server: 0

Response: Success
Message: Originate successfully queued
Server: 0

127.0.0.1 <- Event: Newchannel
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel:
127.0.0.1 <- State: Down
127.0.0.1 <- CallerIDNum: <unknown>
127.0.0.1 <- CallerIDName: <unknown>
127.0.0.1 <- Uniqueid: 1260845705.0
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: OriginateResponse
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Response: Failure
127.0.0.1 <- Channel: SIP/6910
127.0.0.1 <- Context: from-internal
127.0.0.1 <- Exten: 6920
127.0.0.1 <- Reason: 0
127.0.0.1 <- Uniqueid: <null>
127.0.0.1 <- CallerID: 6910
127.0.0.1 <- CallerIDNum: 6910
127.0.0.1 <- CallerIDName: <unknown>
127.0.0.1 <- Server: 0

______________________________________________________________________________________________________

heres what it looks like when on the phone dial another extension:
127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- Context: macro-exten-vm
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 4
127.0.0.1 <- Application: Set
127.0.0.1 <- AppData: EXTTOCALL=6920
127.0.0.1 <- Uniqueid: 1260846095.2
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- Context: macro-exten-vm
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 5
127.0.0.1 <- Application: Set
127.0.0.1 <- AppData: CFUEXT=
127.0.0.1 <- Uniqueid: 1260846095.2
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- Context: macro-exten-vm
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 6
127.0.0.1 <- Application: Set
127.0.0.1 <- AppData: CFBEXT=
127.0.0.1 <- Uniqueid: 1260846095.2
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- Context: macro-exten-vm
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 7
127.0.0.1 <- Application: Set
127.0.0.1 <- AppData: RT=15
127.0.0.1 <- Uniqueid: 1260846095.2
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- Context: macro-exten-vm
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 8
127.0.0.1 <- Application: Macro
127.0.0.1 <- AppData: record-enable|6920|IN
127.0.0.1 <- Uniqueid: 1260846095.2
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- Context: macro-record-enable
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 1
127.0.0.1 <- Application: GotoIf
127.0.0.1 <- AppData: 1?check
127.0.0.1 <- Uniqueid: 1260846095.2
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- Context: macro-record-enable
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 4
127.0.0.1 <- Application: AGI
127.0.0.1 <- AppData: recordingcheck|20091214-220142|1260846095.2
127.0.0.1 <- Uniqueid: 1260846095.2
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- Context: macro-record-enable
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 999
127.0.0.1 <- Application: MixMonitor
127.0.0.1 <- AppData: /recordings20091214-220142-1260846095.2.wav||
127.0.0.1 <- Uniqueid: 1260846095.2
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- Context: macro-exten-vm
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 9
127.0.0.1 <- Application: Macro
127.0.0.1 <- AppData: dial|15|tr|6920
127.0.0.1 <- Uniqueid: 1260846095.2
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- Context: macro-dial
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 1
127.0.0.1 <- Application: GotoIf
127.0.0.1 <- AppData: 1?dial
127.0.0.1 <- Uniqueid: 1260846095.2
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- Context: macro-dial
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 3
127.0.0.1 <- Application: AGI
127.0.0.1 <- AppData: dialparties.agi
127.0.0.1 <- Uniqueid: 1260846095.2
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- Context: macro-dial
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 7
127.0.0.1 <- Application: Dial
127.0.0.1 <- AppData: DAHDI/6|15|tr
127.0.0.1 <- Uniqueid: 1260846095.2
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Newchannel
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/6-1
127.0.0.1 <- State: Rsrvd
127.0.0.1 <- CallerIDNum: <unknown>
127.0.0.1 <- CallerIDName: Free For All Incorporated
127.0.0.1 <- Uniqueid: 1260846102.3
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Newstate
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/6-1
127.0.0.1 <- State: Ringing
127.0.0.1 <- CallerID: <unknown>
127.0.0.1 <- CallerIDName: Free For All Incorporated
127.0.0.1 <- Uniqueid: 1260846102.3
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Dial
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Source: DAHDI/5-1
127.0.0.1 <- Destination: DAHDI/6-1
127.0.0.1 <- CallerID: <unknown>
127.0.0.1 <- CallerIDName: Free For All Incorporated
127.0.0.1 <- SrcUniqueID: 1260846095.2
127.0.0.1 <- DestUniqueID: 1260846102.3
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: ExtensionStatus
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Exten: 6920
127.0.0.1 <- Context: ext-local
127.0.0.1 <- Status: 8
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Newcallerid
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/6-1
127.0.0.1 <- CallerID: 6920
127.0.0.1 <- CallerIDName: <Unknown>
127.0.0.1 <- Uniqueid: 1260846102.3
127.0.0.1 <- CID-CallingPres: 0 (Presentation Allowed, Not Screened)
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Newstate
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- State: Ringing
127.0.0.1 <- CallerID: <unknown>
127.0.0.1 <- CallerIDName: Free For All Incorporated
127.0.0.1 <- Uniqueid: 1260846095.2
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: ExtensionStatus
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Exten: 6010
127.0.0.1 <- Context: default
127.0.0.1 <- Status: 8
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: ExtensionStatus
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Exten: 6910
127.0.0.1 <- Context: ext-local
127.0.0.1 <- Status: 8
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Newstate
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/6-1
127.0.0.1 <- State: Up
127.0.0.1 <- CallerID: 6920
127.0.0.1 <- CallerIDName: <unknown>
127.0.0.1 <- Uniqueid: 1260846102.3
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: ExtensionStatus
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Exten: 6920
127.0.0.1 <- Context: ext-local
127.0.0.1 <- Status: 1
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Newstate
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- State: Up
127.0.0.1 <- CallerID: <unknown>
127.0.0.1 <- CallerIDName: Free For All Incorporated
127.0.0.1 <- Uniqueid: 1260846095.2
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: ExtensionStatus
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Exten: 6010
127.0.0.1 <- Context: default
127.0.0.1 <- Status: 1
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: ExtensionStatus
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Exten: 6910
127.0.0.1 <- Context: ext-local
127.0.0.1 <- Status: 1
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Link
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel1: DAHDI/5-1
127.0.0.1 <- Channel2: DAHDI/6-1
127.0.0.1 <- Uniqueid1: 1260846095.2
127.0.0.1 <- Uniqueid2: 1260846102.3
127.0.0.1 <- CallerID1:
127.0.0.1 <- CallerID2: 6920
127.0.0.1 <- Server: 0

_____________________________________________________________________________________________________

highlight 6910 press record:

10.30.20.137 <= <msg data="11|record|11|152f109c512015a15e78c580917db111" />

127.0.0.1 -> Action: Monitor
127.0.0.1 -> Channel:
127.0.0.1 -> ActionID: monitor-Monitor-
127.0.0.1 -> Mix: 1
127.0.0.1 -> File: 6910-1260846264
127.0.0.1 -> Async: True

127.0.0.1 <- Response: Error
127.0.0.1 <- ActionID: monitor-Monitor-
127.0.0.1 <- Message: No channel specified
127.0.0.1 <- Server: 0
_________________________________________________________________________________________________
highlight 6920 press record:

10.30.20.137 <= <msg data="11|record|12|152f109c512015a15e78c580917db111" />

127.0.0.1 -> Action: Monitor
127.0.0.1 -> Channel:
127.0.0.1 -> ActionID: monitor-Monitor-
127.0.0.1 -> Mix: 1
127.0.0.1 -> File: 6920-1260846321
127.0.0.1 -> Async: True

127.0.0.1 <- Response: Error
127.0.0.1 <- ActionID: monitor-Monitor-
127.0.0.1 <- Message: No channel specified
127.0.0.1 <- Server: 0
______________________________________________________________________________________________

hope I have posted enough information this time.
All of this was done after I have started fop2 in debug mode.
Thanks in advance,

just looking qat it don't know where it got channel SIP/6910 from... its a dahdi channel specified in FreePBX for the extensions.. this is probably the problem. Where can I specify this as a dahdi channel within fop2?

ok have done that and manually changed my button.cfg from SIP/6910 to DAHDI/6910 same as extensions 6920, 6930, and 6940 for those are extensions to the POTS lines directly.

Now when I log in as extension 6910 and try to dial extension 6920 it still fails and I get this:

10.30.20.137 <= <msg data="GENERAL|contexto|1|" />
10.30.20.137 => { 'btn': '0', 'cmd': 'key', 'data': '5tyRgiPJIYPw0lrCE4ie', 'slot': '' }

10.30.20.137 => { 'btn': '0@GENERAL', 'cmd': 'version', 'data': '2.00', 'slot': '' }

10.30.20.137 <= <msg data="1|auth|6910|397983a2c91e3c583334454a1fe1d406" />
10.30.20.137 => { 'btn': '0@GENERAL', 'cmd': 'permit', 'data': 'YWxs', 'slot': '' }

10.30.20.137 => { 'btn': '16@GENERAL', 'cmd': 'zbuttons', 'data': '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', 'slot': '' }

10.30.20.137 <= <msg data="1|initState||397983a2c91e3c583334454a1fe1d406" />
10.30.20.137 => { 'btn': '1@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }

10.30.20.137 => { 'btn': '2@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }

10.30.20.137 => { 'btn': '3@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }

10.30.20.137 => { 'btn': '4@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }

10.30.20.137 => { 'btn': '5@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }

10.30.20.137 => { 'btn': '6@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }

10.30.20.137 => { 'btn': '7@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }

10.30.20.137 => { 'btn': '8@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }

10.30.20.137 => { 'btn': '9@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }

10.30.20.137 => { 'btn': '10@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }

10.30.20.137 => { 'btn': '15@GENERAL', 'cmd': 'settext', 'data': '', 'slot': '0' }

10.30.20.137 => { 'btn': '15@GENERAL', 'cmd': 'state', 'data': 'DOWN', 'slot': '0' }

10.30.20.137 <= <msg data="11|originate|12|397983a2c91e3c583334454a1fe1d406" />

127.0.0.1 -> Action: Originate
127.0.0.1 -> Channel: DAHDI/6910
127.0.0.1 -> Exten: 6920
127.0.0.1 -> Context: from-internal
127.0.0.1 -> Priority: 1
127.0.0.1 -> CallerID: <6910>
127.0.0.1 -> Async: True

127.0.0.1 <- Response: Success
127.0.0.1 <- Message: Originate successfully queued
127.0.0.1 <- Server: 0

Response: Success
Message: Originate successfully queued
Server: 0

127.0.0.1 <- Event: Newchannel
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel:
127.0.0.1 <- State: Down
127.0.0.1 <- CallerIDNum: <unknown>
127.0.0.1 <- CallerIDName: <unknown>
127.0.0.1 <- Uniqueid: 1260904100.1
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: OriginateResponse
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Response: Failure
127.0.0.1 <- Channel: DAHDI/6910
127.0.0.1 <- Context: from-internal
127.0.0.1 <- Exten: 6920
127.0.0.1 <- Reason: 0
127.0.0.1 <- Uniqueid: <null>
127.0.0.1 <- CallerID: 6910
127.0.0.1 <- CallerIDNum: 6910
127.0.0.1 <- CallerIDName: <unknown>
127.0.0.1 <- Server: 0
______________________________________________________________________________________________
when I dial the extension from the phone itself I get this (sorry can't copy this in its entire I'm within an ssh session:

127.0.0.1 <- Application: Set
127.0.0.1 <- AppData: VMBOX=6920
127.0.0.1 <- Uniqueid: 1260904276.2
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- Context: macro-exten-vm
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 4
127.0.0.1 <- Application: Set
127.0.0.1 <- AppData: EXTTOCALL=6920
127.0.0.1 <- Uniqueid: 1260904276.2
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- Context: macro-exten-vm
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 5
127.0.0.1 <- Application: Set
127.0.0.1 <- AppData: CFUEXT=
127.0.0.1 <- Uniqueid: 1260904276.2
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- Context: macro-exten-vm
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 6
127.0.0.1 <- Application: Set
127.0.0.1 <- AppData: CFBEXT=
127.0.0.1 <- Uniqueid: 1260904276.2
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- Context: macro-exten-vm
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 7
127.0.0.1 <- Application: Set
127.0.0.1 <- AppData: RT=15
127.0.0.1 <- Uniqueid: 1260904276.2
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- Context: macro-exten-vm
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 8
127.0.0.1 <- Application: Macro
127.0.0.1 <- AppData: record-enable|6920|IN
127.0.0.1 <- Uniqueid: 1260904276.2
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- Context: macro-record-enable
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 1
127.0.0.1 <- Application: GotoIf
127.0.0.1 <- AppData: 1?check
127.0.0.1 <- Uniqueid: 1260904276.2
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- Context: macro-record-enable
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 4
127.0.0.1 <- Application: AGI
127.0.0.1 <- AppData: recordingcheck|20091215-141123|1260904276.2
127.0.0.1 <- Uniqueid: 1260904276.2
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- Context: macro-record-enable
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 999
127.0.0.1 <- Application: MixMonitor
127.0.0.1 <- AppData: /recordings20091215-141123-1260904276.2.wav||
127.0.0.1 <- Uniqueid: 1260904276.2
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- Context: macro-exten-vm
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 9
127.0.0.1 <- Application: Macro
127.0.0.1 <- AppData: dial|15|tr|6920
127.0.0.1 <- Uniqueid: 1260904276.2
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- Context: macro-dial
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 1
127.0.0.1 <- Application: GotoIf
127.0.0.1 <- AppData: 1?dial
127.0.0.1 <- Uniqueid: 1260904276.2
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- Context: macro-dial
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 3
127.0.0.1 <- Application: AGI
127.0.0.1 <- AppData: dialparties.agi
127.0.0.1 <- Uniqueid: 1260904276.2
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- Context: macro-dial
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 7
127.0.0.1 <- Application: Dial
127.0.0.1 <- AppData: DAHDI/6|15|tr
127.0.0.1 <- Uniqueid: 1260904276.2
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Newchannel
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/6-1
127.0.0.1 <- State: Rsrvd
127.0.0.1 <- CallerIDNum: <unknown>
127.0.0.1 <- CallerIDName: Free For All Incorporated
127.0.0.1 <- Uniqueid: 1260904283.3
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Newstate
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/6-1
127.0.0.1 <- State: Ringing
127.0.0.1 <- CallerID: <unknown>
127.0.0.1 <- CallerIDName: Free For All Incorporated
127.0.0.1 <- Uniqueid: 1260904283.3
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Dial
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Source: DAHDI/5-1
127.0.0.1 <- Destination: DAHDI/6-1
127.0.0.1 <- CallerID: <unknown>
127.0.0.1 <- CallerIDName: Free For All Incorporated
127.0.0.1 <- SrcUniqueID: 1260904276.2
127.0.0.1 <- DestUniqueID: 1260904283.3
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Newcallerid
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/6-1
127.0.0.1 <- CallerID: 6920
127.0.0.1 <- CallerIDName: <Unknown>
127.0.0.1 <- Uniqueid: 1260904283.3
127.0.0.1 <- CID-CallingPres: 0 (Presentation Allowed, Not Screened)
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Newstate
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- State: Ringing
127.0.0.1 <- CallerID: <unknown>
127.0.0.1 <- CallerIDName: Free For All Incorporated
127.0.0.1 <- Uniqueid: 1260904276.2
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: ExtensionStatus
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Exten: 6920
127.0.0.1 <- Context: ext-local
127.0.0.1 <- Status: 8
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: ExtensionStatus
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Exten: 6010
127.0.0.1 <- Context: default
127.0.0.1 <- Status: 8
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: ExtensionStatus
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Exten: 6910
127.0.0.1 <- Context: ext-local
127.0.0.1 <- Status: 8
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Newstate
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/6-1
127.0.0.1 <- State: Up
127.0.0.1 <- CallerID: 6920
127.0.0.1 <- CallerIDName: <unknown>
127.0.0.1 <- Uniqueid: 1260904283.3
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Newstate
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- State: Up
127.0.0.1 <- CallerID: <unknown>
127.0.0.1 <- CallerIDName: Free For All Incorporated
127.0.0.1 <- Uniqueid: 1260904276.2
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: ExtensionStatus
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Exten: 6920
127.0.0.1 <- Context: ext-local
127.0.0.1 <- Status: 1
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: ExtensionStatus
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Exten: 6010
127.0.0.1 <- Context: default
127.0.0.1 <- Status: 1
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: ExtensionStatus
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Exten: 6910
127.0.0.1 <- Context: ext-local
127.0.0.1 <- Status: 1
127.0.0.1 <- Server: 0

127.0.0.1 <- Event: Link
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel1: DAHDI/5-1
127.0.0.1 <- Channel2: DAHDI/6-1
127.0.0.1 <- Uniqueid1: 1260904276.2
127.0.0.1 <- Uniqueid2: 1260904283.3
127.0.0.1 <- CallerID1:
127.0.0.1 <- CallerID2: 6920
127.0.0.1 <- Server: 0
________________________________________________________________________________________________

now when I press record I get this:
10.30.20.137 <= <msg data="11|record|11|577da20107f5723e91f7cdd1fffc5c0c" />

127.0.0.1 -> Action: Monitor
127.0.0.1 -> Channel:
127.0.0.1 -> ActionID: monitor-Monitor-
127.0.0.1 -> Mix: 1
127.0.0.1 -> File: 6910-1260904442
127.0.0.1 -> Async: True

127.0.0.1 <- Response: Error
127.0.0.1 <- ActionID: monitor-Monitor-
127.0.0.1 <- Message: No channel specified
127.0.0.1 <- Server: 0
_____________________________________________________________________________________________

This is getting to be very frustrating, many hours put into this and nothing works.
I am wondering where did I mess this up so bad. Is it from FOP2, my FreePBX setup or is it my Asterisk configuration files. I really wish that AsteriskNOW upon adding all these apps would have better documentation. I am starting to think that your app is fine because I have also set and wrote to the FreePBX forums as well regarding recording all incoming and outgoing calls. FreePBX doesn't record either and is setup to always record all calls for all extensions. Which leaves me to believe that it may be an Asterisk permission problem, but I have stated within the manager.conf file to grant permissions to these extensions as well as the manager, so I am at a complete loss.

I know better then to post the problems of other apps in this forum, and I thank you for your many responses since I get no feedback when I post to the FreePBX, or the AsteriskNOW forums regarding this issue.

Thanks again for your prompt replies!
Maybe you could give me some more options to try and troubleshoot
oh by the way, how do I exit debug mode, have tried exit, quit, -q, /q ? have been closing my session then logging back in to reboot. There has to be a better way.

Great Support once aggain from Nicolás, he has helped me out so much! Got my mis-configured FOP2 box all straighten out.

I am having the same problem as the original poster--none of the buttons works except for hangup.

This is on a more or less virgin Trixbox 2.8.0.3 installation (Asterisk 1.6.0.10). I've enabled the extension I am logging in with to have "all" permissions in the FOP2Admin module.

I do not have a buttons.cfg file, as I am using the autoconfig-users-freepbx.sh file. The manager and secret in fop2.cfg are properly matched to manager.conf.

Here are some excerpts from the debug log immediately after I try to click on some of the non-functional buttons:

10.10.8.111     <= <msg data="14|originate|14|cc6911c5d086d504a994dec25a27e0af" />

127.0.0.1       -> Action: Originate
127.0.0.1       -> Channel: SIP/243
127.0.0.1       -> Exten: 243
127.0.0.1       -> Context: from-internal
127.0.0.1       -> Priority: 1
127.0.0.1       -> CallerID: [name] <243>
127.0.0.1       -> Async: True

127.0.0.1       <- Response: Error
127.0.0.1       <- Message: Permission denied
127.0.0.1       <- Server: 0

Response: Error
Message: Permission denied
Server: 0

-----

10.10.8.111     <= <msg data="14|towhisper|14|cc6911c5d086d504a994dec25a27e0af" />

127.0.0.1       <- Event: PeerStatus
127.0.0.1       <- Privilege: system,all
127.0.0.1       <- ChannelType: SIP
127.0.0.1       <- Peer: SIP/231
127.0.0.1       <- PeerStatus: Registered
127.0.0.1       <- Server: 0

-----

127.0.0.1       <- Event: PeerStatus
127.0.0.1       <- Privilege: system,all
127.0.0.1       <- ChannelType: SIP
127.0.0.1       <- Peer: SIP/237
127.0.0.1       <- PeerStatus: Registered
127.0.0.1       <- Server: 0

127.0.0.1       <- Event: PeerStatus
127.0.0.1       <- Privilege: system,all
127.0.0.1       <- ChannelType: SIP
127.0.0.1       <- Peer: SIP/234
127.0.0.1       <- PeerStatus: Registered
127.0.0.1       <- Server: 0

-----

10.10.8.111     <= <msg data="14|towhisper|12|2d80cea36d9bdc4535c47e7ba7c22db6" />

-----

10.10.8.111     <= <msg data="14|towhisper|12|2d80cea36d9bdc4535c47e7ba7c22db6" />

10.10.8.111     <= <msg data="1|ping||" />
10.10.8.111     => { 'btn': '0', 'cmd': 'pong', 'data': '0', 'slot': '' }

I hope we can get this working, as I just bought FOP2 and am impressed with what it shows and the interface! :)

I tried replacing read = system,call,log,verbose,command,agent,user and write = [the same] with read = all and write = all. I still can't do listen or whisper, but the system is at least now responding to the Dial, Pickup, Transfer, and Transfer to Voicemail options.

Here is the only line that appears in the Debug mode when I click "Whisper":

10.10.8.115     <= <msg data="14|towhisper|12|c3a8877fb35e1b910870cb61a91263ef" />

A similar line appears when I click "Listen."

Here is the contents of manager.conf (I changed the permissions back to the default in case they were screwing things up):

;
; Asterisk Call Management support
;
[general]
enabled = yes
port = 5038
bindaddr = 0.0.0.0

[admin]
secret = *****
deny=0.0.0.0/0.0.0.0
permit=127.0.0.1/255.255.255.0
read = all
write = all

#include manager_additional.conf
#include manager_custom.conf

And here is fop2.cfg:

[general]
; AMI definitions
manager_host=localhost
manager_port=5038
manager_user=admin
manager_secret=***** [same as in manager.conf]
;event_mask=call,agent

; Daemon definitios
;listen_port      = 4445
;restrict_host    = www.asternic.org
;web_dir          = /var/www/html/operator/fop2

; Global Config
language           = en
poll_interval      = 86400
poll_voicemail     = 1
monitor_ipaddress  = 0

; Force blind transfer on asterisk 1.6
blind_transfer     = 1

; Force supervised transfer on asterisk 1.4
; requires the atxfer manager backport patch
; supervised_transfer = 1

; Force delimiter for asterisk applications
; force_parameter_delimiter = ","

; When adding or removing members to a queue, fop2 will default to
; AddQueueMember/RemoveQueueMember commands. If you set use_agentlogin
; to 1, together with the QueueChannel in a button definition set to
; an Agent number it will use AgentCallbackLogin and Agentlogoff instead.
;
; use_agentlogin = 0


; Master Password that overrides any individual one
;master_key = [default]

; Filename to use when start monitoring, you can use ${UNIQUEID},
; ${ORIG_EXTENSION}, ${DEST_EXTENSION}
; and date formats %Y %m %d to construct the filename.
;
; Settings for modifying the recording filename
; Available variables are:
; ${UNIQUEID} = Unique Id of the call
; ${TIMESTAMP} = Unix Timestamp when the recording was initiated
; ${DEST_EXTENSION} = Target extenstion being monitored
; ${ORIG_EXTENSION} = Extension/User that started the recording (not
;                     the other leg)
; Date variables:
; %Y 4 digits year
; %y 2 digits year
; %m 2 digits month
; %d 2 digits day
; %h 2 digits hour
; %i 2 digits minute
; %s 2 digits seconds

monitor_filename=g${DEST_EXTENSION}-${UNIQUEID}
monitor_format=wav
monitor_mix=true

; --- SAMPLE GROUPS ---
;group=queues:QUEUE/100,QUEUE/101
;group=deptA:SIP/100,SIP/101,SIP/102
; --- END SAMPLE ---

; --- SAMPLE USER LIST ---
; format: user= EXTENSION : SECRET : PERMISSIONS : GROUPS
; You can enumerate several permissions and groups separated by comma
; available permissions:  'all', 'dial', 'hangup', 'meetme', 'pickup',
;                         'record', 'spy', 'transfer', 'whisper',
;                         'queuemanager', 'queueagent', 'phonebook'
;
;user=620:1234:all:queues
;user=621:1234:dial,transfer,pickup:deptA
;user=622:1234:all
;user=623:1234:meetme,pickup
;buttonfile=buttons.cfg
; ------ END SAMPLE ------

; This line is NOT commented, it executes
; the autoconfig configuration for FreePBX
#exec autoconfig-users-freepbx.sh

Users and permissions are set in fop2admin. I have the users I am testing with set for "all" permissions, and the extensions I am trying to monitor set to "none". (The way the mouseover text for the Privacy column in fop2admin reads, it is hard to tell, but I think "none" means "no restrictions" and therefore it should work, whereas "all" means "all things restricted. Regardless, I tried it with all and nothing happened.)

I have tried with Firefox, IE, and Google Chrome, just in case it is a browser issue.